How much does a vehicle wrap cost?

What affects the final price

Frequently asked questions

How much does a vehicle wrap cost?

Vehicle wraps at WrapMasters are priced at $15 to $20 per square foot, with print and installation included. A full wrap on a full-size pickup runs $4,050 to $5,150. A full-size van runs $5,050 to $9,400, depending on wheelbase and roof height. A 16 ft box truck, at roughly 500 square feet, runs $7,500 to $10,000. Use the estimator on this page to price your exact make and model. Final pricing depends on vehicle size, surface complexity, and material selection.

How much does it cost to wrap a truck?

A full wrap on a full-size pickup such as an F-150, Ram 1500, Silverado 1500, or Tundra runs $4,050 to $5,150 with print and installation included, depending on cab and bed length. Midsize pickups like the Tacoma or Ranger run $3,300 to $4,550, and heavy-duty pickups run $3,650 to $5,400. A partial truck wrap starts at $1,500 and is priced by coverage area. Box trucks are larger: a 16 ft box body runs $7,500 to $10,000.

How much does it cost to wrap a Ford F-150?

A full wrap on a Ford F-150 runs $4,200 to $4,950 with print and installation included. The low end is a regular cab with the short bed, the high end is the largest cab and bed combination. Sides and back only costs less.

How much does it cost to wrap a Ram 2500 or 3500?

A full wrap on a Ram 2500 or 3500 runs $4,350 to $5,400 with print and installation included, from the regular cab to the crew cab with the 8 ft bed. Other heavy-duty pickups, including the F-250, F-350, and Silverado HD, run $3,650 to $5,400.

How much does it cost to wrap a Ford Transit van?

A full wrap on a Ford Transit runs $5,400 to $7,900 with print and installation included. The low end is the 130 inch wheelbase with the low roof, the high end is the extended high roof. Roof height is the biggest swing in van pricing.

How much does it cost to wrap a Sprinter van?

A full wrap on a Mercedes-Benz Sprinter runs $6,550 to $9,400 with print and installation included. The 144 inch standard roof is the low end and the 170 inch extended wheelbase with the tallest roof is the high end. Sprinters carry more film than most vans, which is why the range is wider.

Is the online estimate a quote?

No. The estimator gives a range for your make and model, from its smallest version to its largest, for print and installation. Your firm price comes after we see the vehicle, because body lines, trim, and existing graphics change the install.

What is included in the price?

The price includes premium 3M cast vinyl film, full-color digital printing, professional installation by a 3M Preferred Installer, UV-resistant lamination, and a 2-year workmanship warranty. Wrap removal is not included. Design is quoted separately: every wrap we design includes the BrandBlueprint, our brand strategy engagement, listed on the quote at $3,750.

Is vehicle wrap removal included?

No. Wrap removal is a separate service. If you need removal of an existing wrap before a new installation, ask about removal pricing when you contact us.

Do I need to bring my own design?

Every wrap we design starts with the BrandBlueprint, our brand strategy engagement, listed on every quote at $3,750. It is what lets us put a wrap on the road that we will stand behind against the 45 MPH Test. Printing client-supplied print-ready artwork is the exception rather than our standard process. We can do it, but the design stays yours and our visibility standard does not apply to work we did not design.

Does my vehicle need to be in a certain condition?

Yes. Paint must be factory clear coat in good condition. Wraps do not adhere correctly to faded, repainted, peeling, or otherwise compromised paint. We inspect each vehicle before installation and will let you know if anything needs attention.

How long does a vehicle wrap last?

A professionally installed wrap using 3M cast vinyl typically lasts 5 to 7 years with normal outdoor exposure. Garaged vehicles often see longer life. WrapMasters backs every wrap with a 2-year workmanship warranty.

Is it cheaper to wrap or paint a van?

A basic commercial repaint at a body shop runs $3,000 to $6,000 and leaves you with a plain-color van. A full wrap in the same price range gives you a fully printed graphic, company name, phone number, and a removable finish that protects the factory paint underneath. For commercial vehicles where the look is also advertising, wrapping almost always delivers more value per dollar than painting.

Can a wrapped vehicle go through a carwash?

Touchless and hand washes are safe for wrapped vehicles. Automatic brush carwashes are not recommended. The stiff bristles can lift wrap edges at seams, door handles, and mirrors. For best results, hand wash with mild soap and a soft cloth. Avoid directing a pressure washer at seams and edges.

What is the downside of vehicle wrapping?

Wraps require clean factory paint in good condition to adhere correctly. Vehicles with significant fading, repairs, or repaints may not be good candidates. Wraps also need periodic care since neglecting maintenance in Texas sun can shorten lifespan. Low-grade films fade faster, which is why WrapMasters uses 3M cast vinyl with UV-resistant lamination backed by a 2-year warranty.

How much does it cost to wrap a box truck?

A 16 ft box truck carries roughly 500 square feet of wrappable surface, which at our $15 to $20 per square foot rate puts a full wrap between $7,500 and $10,000, print and installation included. Longer or taller box bodies carry more area and are quoted from measured square footage.

Do you wrap trailers?

Yes. Enclosed trailers, food trailers, and concession trailers are regular work, priced on the same $15 to $20 per square foot rate with print and installation included. Trailer sides are large flat panels, which makes the square footage straightforward to measure.

Do you wrap single vehicles or only fleets?

Both. We wrap single vehicles and fleets of any size, from one truck to an entire commercial fleet across multiple locations.

Where are you located and what areas do you serve?

WrapMasters is located in Denton, TX and serves the entire Dallas-Fort Worth area, including Carrollton, Lewisville, Little Elm, and Aubrey. For fleet programs outside North Texas, our own installers travel to the client's location.