Fleet Wraps for Fort Worth Service Companies
Fleet wraps and fleet branding for Fort Worth and Tarrant County service companies: one design system across every truck, designed, printed, and installed at our shop in Denton.
Fort Worth fleet wraps for HVAC, plumbing, roofing, electrical, and other service companies running more than one truck across Tarrant County. The job is the same whether you have two trucks or twenty: every vehicle should read as the same company from across the street, so a homeowner in Keller who sees one of your trucks recognizes the next one in Burleson. Our shop is in Denton, about 45 minutes up I-35W. We are not a Fort Worth storefront, and we will not pretend to be one. For Fort Worth fleets, the brand work, the design, the print, and the install all happen under one roof, and every vehicle we design is built to pass the 45 MPH Test.
View us on Google
One system, every truck
Same layout, same colors, same contact path on a pickup, a van, and a box truck.
Rolled out in waves
One to three vehicles at a time, so you are never short the trucks you need.
Built for Tarrant County roads
Readable at 45 MPH on I-35W, I-30, and Loop 820, and parked in a driveway.
Design, print, install in one shop
No handoffs between a designer, a printer, and an installer.
Fleets we have built in North Texas
These are DFW-area fleets, not Fort Worth ones yet. Each shows what a fleet system does: one company, recognizable on every vehicle it owns.
What clients report
$800K to $3.7M
revenue, two years after the rebrand
The Job Hog rebranded from Platinum Construction. Both figures are as the owner reported them.
Read the case study
1 to 4
trucks in eighteen months
Knock Em Dead Pest Control grew from a single wrapped truck to a four-truck fleet.
Read the case study
Both are growth the owners reported after rebranding, not a claim about what a wrap does on its own. The work did that. The brand is what made the market recognize the company doing it.
3M Preferred Fleet Installer
Certified 3M commercial wrap standards
2026 Business of the Year
Lake Cities Region, Denton-Lake Cities Rotary
2-Year Limited Warranty
Workmanship and adhesion on every install
200+ Fleets Wrapped
HVAC, plumbing, roofing, construction, electrical
At a glance
- Service
- Fleet wraps, fleet branding systems, and commercial vehicle graphics
- Serving
- Fort Worth, Arlington, Keller, North Richland Hills, Burleson, Mansfield, and the rest of Tarrant County
- Shop
- 2105 Sadau Court, Suite 120, Denton, TX 76210, about 45 minutes from downtown Fort Worth
- Hours
- Monday to Friday, 8am to 5pm. Saturday and Sunday by appointment
- Print and install
- $15 to $20 per square foot. Full-size pickups $4,050 to $5,150, full-size vans $5,050 to $9,400
- Design
- BrandBlueprint ($3,750), quoted separately. Sets the brand direction for every channel, with the fleet design included
- Fleet scheduling
- 1 to 3 vehicles per wave, so the rest of the fleet keeps running
- Turnaround
- 1 to 2 days per vehicle, drop-off to pickup
- Materials
- 3M premium cast vinyl with HP Latex inks
- Warranty
- 2-year limited warranty on workmanship and adhesion
What a fleet system is
Most wraps are designed one vehicle at a time. That works until the second truck is a different make, the third is a van, and nothing lines up. A fleet system is designed once: where the name sits, how big the phone number runs, which panels carry the trade, and how the colors fall across the body. Then it is fitted to each vehicle you own, and to the ones you add later.
The payoff is recognition. A homeowner who sees your truck at a neighbor's house on Monday and another one on the highway Thursday should know it is the same company without reading anything. Every layout is scored against the 45 MPH Test before it goes to print.
How it works from Fort Worth
- Design happens first, by video call or at our shop. No vehicle has to leave Fort Worth until the design is approved.
- Vehicles come to Denton in waves of one to three, about 45 minutes up I-35W from downtown.
- Each vehicle is ready in 1 to 2 days. Most clients drop off and pick up without waiting on-site.
- New vehicles added later get the same system, so the fleet stays consistent as it grows.
Fort Worth trades we wrap for
- HVAC: heat-resistant films and rollouts scheduled ahead of the summer rush.
- Plumbing: high-contrast layouts readable at a quick glance in a neighborhood.
- Roofing: ladder-rack-compatible designs that hold up on job sites.
- Electrical: consistent, professional fleets that signal licensed and insured.
- Landscaping and pest control: durable laminates for daily outdoor exposure across large service areas.
“I recently had the pleasure of working with WrapMasters to rebrand my roofing company's fleet, and the results have been outstanding. The vehicle wraps are not only eye-catching but also of exceptional quality, and we have noticed an increase in brand recognition in our service areas.”
AJ Garza, Texline Roofing
Recent work
Local resources
A few of the city and community organizations in the areas we serve.
Fleet Wraps for Fort Worth Service Companies FAQ
- Do you wrap fleets for Fort Worth and Tarrant County companies?
- Yes. We wrap fleets for service companies across Fort Worth and Tarrant County, including Arlington, Keller, North Richland Hills, Burleson, Mansfield, and Crowley. Our shop is in Denton, about 45 minutes north on I-35W.
- How much does a fleet wrap cost?
- Print and installation is $15 to $20 per square foot. A full-size pickup typically runs $4,050 to $5,150 and a full-size van $5,050 to $9,400. The design is quoted separately as the BrandBlueprint ($3,750). It sets the brand direction for every channel, and the fleet design inside it covers the whole fleet, not one vehicle at a time. Fleets of five or more are quoted as a program. See truck, van, and box truck wrap pricing.
- How do you keep a mixed fleet looking the same?
- We design one fleet system first: name placement, phone number size, trade wording, and color layout. Then we fit it to each vehicle, whether it is a Tacoma, a Transit, or a box truck. Vehicles you add later get the same system.
- How long will my trucks be out of service?
- A single vehicle is typically ready in 1 to 2 days from drop-off to pickup. For fleets we schedule 1 to 3 vehicles at a time so you are never without the trucks you need on a given day.
- Do I have to bring every truck to Denton?
- The design is approved before any vehicle moves, by video call or at our shop. After that, each vehicle comes to Denton for print and installation, which is how we keep the quality and the 2-year warranty consistent.
- Do you offer branding, or only wraps?
- Branding comes first. Fleet-First Branding starts with the BrandBlueprint, which sets the brand direction for every channel: positioning, promise, voice, and how the brand shows up on your trucks, website, Google listing, and everything else. The fleet design is included in it.
Explore more
Industries we serve
Don't be a stranger.
See where your current wrap is losing visibility. Upload a side or rear photo and get an instant 45 MPH Test visibility score. Free, no commitment.
New business or no wrap yet? Get started instead, no audit needed.